Roland AdvancedJET AJ serija najbrži je solventni printer u svojoj klasi.
Dolazi u dva modela:
Advanced JET omogućava tisak raznih aplikacija poput jumbo plakata, bannera, grafika za vozila i sl. sa maksimalnom brzinom printa 90 m2/h.
Seiko glave sa 510 sapnica po liniji i 35pl po točki, pružaju izvrsnu kvalitetu slike na velikim brzinama. Sadrži heavy-duty sustav za namatanje, spreman za prihvat rola težine do 100 kg što AJ čini idealnim za duže produkcijske poslove bez nadzora.
Roland EcoExtreme tinte razvijene su isključivo za AdvancedJET seriju s ciljem postizanja izvanredne gustoće boja, širokog gamuta i trajne otpornosti.
» Prikaži specifikaciju
| MODEL | AJ-1000 | AJ-740 | |
| Printing technology | Piezoelectric inkjet | ||
| Media | Width | 1220 to 2641 mm (48 to 104 in.) | 1220 to 1910 mm (48 to 75.2 in.) |
| Thickness | Maximum 1.0 mm (39 mil) with liner | ||
| Roll outer diameter | Maximum 250 mm (9.8 in.) | ||
| Roll weight | Maximum 100 kg (220 lb.) | ||
| Core diameter | 76.2 mm (3 in.) | ||
| Printing width *1 | Maximum 2600 mm (102.3 in.) | Maximum 1870 mm (73.6 in.) | |
| Ink cartridges | Types | Roland EcoXtreme cartridge | |
| Capacity | 1 liter | ||
| Colors | 6 colors (cyan, magenta, yellow, black, light cyan, and light magenta) | ||
| Printing resolution (dots per inch) | Maximum 720 dpi | ||
| Distance accuracy *2 | Error of less than ±0.3 % of distance traveled, or ±0.3 mm, whichever is greater | ||
| Media heating system *3 | Preheater and print heater, setting range for the preset temperature: 35 to 50°C (95 to 122°F) Heating method (Used in combination with the blower fan), setting range for the preset temperature: 35 to 60°FC (95 to 140°F) |
||
| Media take-up system | Roll outer diameter |
Maximum 250 mm (9.8 in.) | |
| Roll weight | Maximum 100 kg (220 lb.) | ||
| Connectivity | Ethernet (10BASE-T/100BASE-TX, automatic switching) | ||
| Power-saving function | Automatic sleep | ||
| Power requirements | Printer: AC 200 to 240 V ±10 %,
10 A, 50/60 Hz Dryer: AC 200 to 240 V ±10 %, 10 A, 50/60 Hz |
Printer: AC 200 to 240 V ±10 %,
8.5 A, 50/60 Hz Dryer: AC 200 to 240 V ±10 %, 8.5 A, 50/60 Hz |
|
| Power consumption | During operation | Printer: Approx. 1600 W, Dryer: Approx. 2300 W |
Printer: Approx. 1190 W, Dryer: Approx. 1620 W |
| Sleep mode | Approx. 60 W | ||
| Acoustic noise level | During operation | 70 dB (A) or less (according to ISO 7779) | |
| During standby | 40 dB (A) or less (according to ISO 7779) | ||
| Dimensions (with stand) | 4299 (W) x 1115 (D) x 1413 (H) mm (169.3 (W) x 43.9 (D) x 55.7 (H) in.) |
3632 (W) x 1115 (D) x 1359 (H) mm (143 (W) x 43.9 (D) x 53.5 (H) in.) |
|
| Weight | 598 kg (1319 lb.) | 478 kg (1050 lb.) | |
| Environmental | Power on | Temperature: 20 to 32°C (68 to 89.6°F) humidity: 35 to 80 % (no condensation) |
|
| Power off | Temperature: 5 to 40°C (41 to 104°F) humidity: 20 to 80% (no condensation) | ||
| Accessories | Power cords, roll shafts, end caps, spacers, media reinforcement pipe, paper tube, drain bottle, media gauge, media clamps, hexagonal wrenches, Head-unit tool, cleaning kit, syringe, tube, maintenance liquid cartridge, software RIP, Roland-PrintServer CD-ROM, User's Manual, Setup Guide, Roland-PrintServer Network Settings Guide | ||
| *1 The length of printing is subject to the limitations of the program. *2 At Roland PET film, print travel: 1 m, temperature: 25°C (77°F), humidity: 50 %, not assured when the print heater or dryer is used. *3 Warm-up is required after power-on. This may require 5 to 20 minutes, depending on the operating environment. Depending on the ambient temperature and media width, it may not reach a preset temperature. |
|||
| Roland VersaWorks System Requirements | |||
| Operation system | Windows Vista® Ultimate or Business (32-bit edition), or Windows® XP Professional Service Pack 2, or Windows® 2000 Service Pack 4 | ||
| CPU | Pentium 4, 2.0 GHz or faster recommended | ||
| RAM | 1 GB. 2 GB or more recommended | ||
| Free hard-disk space | 40 GB for more recommended | ||
