Najprofesionalnije Rolandovo integrirano Print&Cut rješenje.
Dostiže maksimalnu brzinu do 41m2/h. Namatalica i sušač integrirani su u sam uređaj te omogućavaju veliku brzinu ispisa i istovremeno sušenje otiska. Dolazi u opcijama sa četiri ili šest boja.
Najnoviji modeli omogućavaju i tisak bijele boje i čine ga jedinstvenim solventnim printerom sa tom mogučnošću.
Najnovija integrirana RIPC (Roland Inteligent Pass Control) omogućava tisak pri većim brzinama sa većom kvalitetom ispisa, izbjegavajući pruganje (bending) na otisku.
» Prikaži specifikaciju
| Model | XC-540 | |
| Printing technology | Piezoelectric inkjet | |
| Media | Width | 260 to 1,371 mm (10.3 to 54 in.) |
| Thickness |
Maximum 1.0 mm (39 mil) with liner, for printing Maximum 0.4 mm (15 mil) with liner, for cutting |
|
| Roll outer diameter |
Maximum 180 mm (7 in.) | |
| Roll weight | Maximum 30 kg (66 lb.) | |
| Core diameter | 50.8 mm or 76.2 mm (2 in. or 3 in.) | |
| Printing/cutting width *1 | Maximum 1,346 mm (53 in.) | |
Ink cartridges |
Types | Roland ECO-SOL MAX INK |
| Capacity | 220 cc or 440 cc | |
| Color | XC-540: six colors (cyan, magenta, yellow, black, light cyan, and light magenta) XC-540W: five colors (cyan, magenta, yellow, black and white) |
|
| Printing resolution (dots per inch) |
Maximum 1,440 dpi | |
| Cutting speed | 10 to 600 mm/s (10 to 300 mm/s in media-feed direction) | |
| Blade force | 30 to 300 gf | |
| Blade offset | 0.000 to 1,500 mm (0 to 0.0591 in.) | |
| Software resolution (when cutting) |
0.025 mm/step (0.000984 in./step) | |
| Distance accuracy (when printing) *2 *3 |
Error of less than ±0.3% of distance traveled, or ±0.3 mm, whichever is greater | |
| Distance accuracy (when cutting) *3 |
Error of less than ±0.4% of distance traveled, or ±0.3 mm, whichever is greater When distance correction has been performed (when the setting for [CUTTING MENU] - [CALIBRATION] has been made): Error of less than ±0.2% of distance traveled, or ±0.1 mm, whichever is greater | |
| Repeatability (when cutting) *3 *4 |
±0.1 mm or less | |
| Alignment accuracy for printing and cutting *3 *5 |
±0.5 mm or less | |
| Alignment accuracy for printing and cutting when reloading media *3 *6 |
Error of less than ±0.5% of distance traveled, or ±3 mm, whichever is greater | |
| Media heating system *7 | Print heater/preheater, setting range for the preset temperature: 30 to 50°C (86 to 122°F) and dryer, setting range for the preset temperature: 30 to 55°C (86 to 130°F) | |
| Connectivity | Ethernet (10BASE-T/100BASE-TX, automatic switching) | |
| Power-saving function | Automatic sleep feature | |
| Power requirements | AC 100 to 120 V ±10%, 13A, 50/60 Hz or AC 220 to 240 V ±10%, 7A, 50/60 Hz | |
| Power consumption |
During operation |
Approx. 1,600 W |
| Sleep mode | Approx. 47 W | |
| Dimensions (with stand) | 2,694 (W) x 1,103 (D) x 1,260 (H) mm (106 (W) x 43.4 (D) x 49.6 (H) in.) | |
| Weight (with stand) | 197 kg (434.3 lb.) | |
| Environmental | Power on | Temperature: 15 to 32°C (59 to 90°F) [20°C (68°F) or more recommended], Humidity: 35 to 80% (no condensing) |
| Power off | Temperature: 5 to 40°C (41 to 104°F), Humidity: 20 to 80% (no condensing) | |
| Accessories | Stand, power cord, blade, blade holder, media clamps, replacement blade for separating knife, cleaning kit, software RIP, user's manual, etc. | |
*1 The length of printing or cutting is subject to the limitations of the program. *2 Using Roland specified media, print travel of 1 m, temperature: 25°C (77°F), humidity: 50 %RH *3 Not assured when the print heater or dryer is used. *4 Using Roland specified media, loaded on the shaft, [PREFEED] menu item must be set to "ENABLE," with 25 mm or
more for both right and left margins and 35 mm or more front margin, excluding expansion or contraction of the media. *5 Provided that media length is under 3,000 mm. Temperature: 25°C (77°F). Excluding possible shift caused by expansion/contraction of the media and/or by reloading the media. *6 Using Roland specified media, data size: 1,000 mm in the media-feed direction, 1,346 mm in the carriage-movement
direction. No lamination. Automatic detection of crop marks at 4 points when media is reloaded. During cutting,
[PREFEED] menu item must be set to "ENABLE." Temperature: 25°C (77°F). *7 Warm-up is required after powerup. This may require 5 to 20 minutes, depending on the operating environment. The preset temperature may fail to be reached depending on the ambient temperature and media width. |
||
| Heater and Blower (DU-540) Specifications | ||
| Dryer unit *8 | Heating type (with blower fan), setting range for the preset temperature: 30 to 55°C (86 to 130°F) | |
| Power requirements | Voltage and frequency |
AC 100 to 120 V ±10 %, 50/60 Hz or AC 220 to 240 V ±10 %, 50/60 Hz |
| Power capacity *9 |
5 A (100 to 120 V) or 3 A (220 to 240 V) | |
| Power consumption | Approx. 650 W | |
| Dimensions including printer |
2,694 (W) x 1,210 (D) x 1,260 (H) mm (106-1/8 (W) x 47-11/16 (D) x 49-5/8 (H) in.) | |
| Weight including printer | 217 kg (478.3 lb.) | |
*8 Warm-up is required after powerup. This may require 5 to 20 minutes, depending on the operating environment. *9 Be sure to check the breaker capacity and use separate power-outletsfor the printer and the dryer. |
||
| Roland VersaWorks System Requirements | ||
| Operating system | Windows Vista™ Ultimate or Business (32-bit edition), or Windows® XP Professional Service Pack 2, or Windows® 2000 Service Pack 4 | |
| CPU | Pentium 4, 2.0 GHz or faster recommended | |
| RAM | 1 GB or more recommended | |
| Free hard-disk space | 40 GB or more recommended | |
| ABOUT WHITE INK | ||
1. The pigment in white ink will settle in the cartridge and ink flow system. 2. Due to the nature of white ink, you must shake the cartridge before each use and perform periodic maintenance to prevent clogged nozzles. 3. We recommend using a drying system to dry white ink thoroughly before printing CMYK over white ink. 4. Some color shift may occur when printing CMYK over white ink. 5. White ink offers less longevity than CMYK and is affected by environmental conditions. |
||
Serija XJ izgrađena je na poznatoj Rolandovoj SOLJET tehnologiji za postizanje izuzetne kvalitete na višoj brzini printa.
SOLJET PRO III XJ serija nudi dva modela:
Sa maksimalnom brzinom do 42,6 m2/h , XJ je dizajniran za produkcijsko printanje vanjskih i unutarnjih grafika: banneri, svjetleće reklame, plakati velikih formata ...
Prilikom većih produkcija, XJ odlikuje mogućnost sustava automatskog održavanja koji štedi dragocjeno vrijeme i tintu, a u cjelini rezultira nižom potrošnjom.
» Prikaži specifikaciju
| Model | XJ-740 | XJ-640 | |
| Printing technology | Piezoelectric inkjet | ||
| Media | Width | 210 to 1879 mm (8.3 to 74 in.) | 210 to 1625 mm (8.3 to 64 in.) |
| Thickness | Maximum 1.0 mm (39 mil) with liner | ||
| Roll outer diameter | Maximum 210 mm (8.3 in.) | ||
| Roll weight | Maximum 47 kg (103 lb.) | Maximum 40 kg (88 lb.) | |
| Core diameter | 76.2 mm (3 in.) or 50.8 mm (2 in.) | ||
| Printing width *1 | Maximum 1869 mm (73.6 in.) | Maximum 1615 mm (63.6 in.) | |
| Ink cartridges | Types | Roland ECO-SOL MAX cartridge | |
| Capacity | 220 cc or 440 cc | ||
| Colors | 6 colors (cyan, magenta, yellow, black, light cyan, and light magenta) or 4 colors (cyan, magenta, yellow, and black) |
||
| Printing resolution (dots per inch) | Maximum 1440 dpi | ||
| Distance accuracy *2 | Error of less than ±0.3 % of distance traveled, or ±0.3 mm, whichever is greater | ||
| Media heating system *3 | Print heater, setting range for the preset temperature: 30 to 45°C (86 to 112°F) Dryer, setting range for the preset temperature: 30 to 50°C (86 to 122°F) |
||
| Media take-up system | Roll outer diameter | Maximum 250 mm (9.8 in.) | |
| Roll weight | Maximum 50 kg (110 lb.) | ||
| Connectivity | Ethernet (10BASE-T/100BASE-TX, automatic switching) | ||
| Power-saving function | Automatic sleep | ||
| Power requirements | AC 100 to 120 V ±10 %, 13 A, 50/60 Hz or AC 220 to 240 V ±10 %, 7 A, 50/60 Hz |
||
| Power consumption | During operation | Approx. 1600 W | |
| Sleep mode | Approx. 47 W | ||
| Acoustic noise level | During operation | 64 dB (A) or less (according to ISO 7779) | |
| During standby | 45 dB (A) or less (according to ISO 7779) | ||
| Dimensions (with stand) | 3169 (W) x 1103 (D) x 1260 (H) mm (124.8 (W) x 43.4 (D) x 49.6 (H) in.) |
2948 (W) x 1103 (D) x 1260 (H) mm (116 (W) x 43.4 (D) x 49.6 (H) in.) |
|
| Weight (with stand) | 225 kg (495 lb.) | 213 kg (469 lb.) | |
| Environmental | Power on | Temperature: 15 to 32°C (59 to 90°F) (20°C [68°F] or more recommended), humidity: 35 to 80 %RH (non-condensing) |
|
| Power off | Temperature: 5 to 40°C (41 to 104°F), humidity: 20 to 80 %RH (non-condensing) | ||
| Accessories | Stand, power cord, media clamps, media flanges, replacement blade for separating knife, cleaning kit, software RIP, and User's Manual, etc. |
||
|
*1 The length of printing is subject to the limitations of the program. *2 At Roland PET film, print travel: 1 m, temperature: 25°C (77°F), humidity: 50 %, not assured when the print heater or dryer is used. *3 Warm-up is required after power-on. This may require 5 to 20 minutes, depending on the operating environment. Depending on the ambient temperature and media width, it may not reach a preset temperature. | |||
| Roland VersaWorks System Requirements | |||
| Operation system | Windows Vista® Ultimate or Business (32-bit edition), or Windows® XP Professional Service Pack 2, or Windows® 2000 Service Pack 4 |
||
| CPU | Pentium 4, 2.0 GHz or faster recommended | ||
| RAM | 1 GB. 2 GB or more recommended. | ||
| Free hard-disk space | 40 GB for more recommended | ||
