VersaCAMM VS-640/540/420/300 serije predstavlja najnoviju inovaciju koju donosi jedino Roland. Prvi printer/cutter na tržištu koji omogućuje tisak bijele i srebrne boje, te još 512 metalik varijanti.
Nova, poboljšana glava, različite širine stroja, sistem za cirkulaciju bijele i metalik boje, te još mnogo novih kvalitetnih rješenja ovaj printer čine idealnim za sve potrebe.
ECO-SOL MAX boje donose nekoliko ključnih poboljšanja, uključujući kraće vrijeme sušenja, veću otpornost na grebanje, bolju pokrivnost i širi spektar boja na svim materijalima. Boje su gotovo bez mirisa i ne zahtjevaju dodatne sisteme za ventilaciju prostora.
» Prikaži specifikaciju
| Model | SP-540V | SP-300V | |
| Printing/Cutting method | Piezo ink-jet method/media-moving method | ||
| Acceptable media width | 210 to 1371 mm (8-5/16 to 54 in.) | 182 to 762 mm (7-3/16 to 30 in.) | |
| Printing/Cutting width*1 | Maximum 1346 mm (53 in.) | Maximum 736mm (29 in.) | |
| Ink cartridges | Capacity |
220 cc ± 5 cc | |
Color |
Four colors (cyan, magenta, yellow and black) | ||
Printing resolution (Printing dot resolution) |
Max. 1440 dpi | ||
Acceptable tool |
Special blade for CAMM-1 series | ||
Cutting Speed |
10 to 300 mm/s | ||
Blade force |
30 to 300 gf | ||
Blade offset compensation |
0.000 to 1.500 mm (0 to 0.0591 in.) | ||
Software resolution (When cutting) |
0.025 mm/step (0.000984 in./step) | ||
Distance accuracy (When Printing)*2*3 |
Error of less than ±0.3 % of distance traveled, or ±0.3 mm, whichever is greater | ||
Distance accuracy (When cutting)*3 |
Error of less than ±0.4 % of distance traveled, or ±0.3 mm, whichever is greater When distance correction has been performed (when the setting for [CALIBRATION] - [CUTTING ADJ.] has been made): Error of less than ±0.2 % of distance traveled, or ±0.1 mm, whichever is greater |
||
Repetition accuracy (When cutting)*3*4 |
±0.1 mm or less | ||
Repetition between printing and cutting*3*5 |
±0.5 mm or less | ||
Alignment accuracy for printing and cutting when reloading media *3*6 |
Error of less than ±0.5 % of distance traveled, or±3 mm, whichever is greater | ||
Media dryer |
Heating method, Setting range for the preset temperature: 35 to 50°C (95 to 122°F) | ||
Ink -fixing device |
Print heater, Setting range for the preset temperature: 35 to 50°C (95 to 122 °F) | ||
Interface |
Ethernet (10BASE-T/100BASE-TX, automatic switching) | USB interface (compliant with Universal Serial Bus Specification Revision 1.1) | |
Ower-saving function |
Automatic sleep feature | ||
Power supply |
Voltage and frequency |
AC 100 to 120 V ± 10 % 50/60 Hz or AC 220 to 240 V ± 10 % 50/60 Hz | |
Required power capacity |
8.8 A (100 to 120 V) or 4.7 A (220 to 240 V) |
6 A (100 to 120 V) or 3 A (220 to 240 V) |
|
Power consumption |
During operation |
Approx. 1080 W (100 to 120 V) or 1230 W (220 to 240 V) |
Approx. 470 W (100 to 120 V) or 650 W (220 to 240 V) |
Sleep mode |
Approx. 30 W | Approx. 29 W | |
Acoustic noise level |
During operation |
64 dB (A) or less (according to ISO 7779) | |
During standby |
40 dB (A) or less (according to ISO 7779) | ||
Dimensions (With stand) |
2390 (W) x 800 (D) x 1291 (H) mm (94-1/8 (W) x 31-1/2 (D) x 50-7/8 (H) in.) |
1720 (W) x 770 (D) x 1275 (H) mm (67-3/4 (W) x 30-3/8 (D) x 50-1/4 (H) in.) |
|
Weight (With stand) |
149 kg (329 lb.) | 124 kg (273 lb.) | |
Environment |
Power on |
Temperature: 15 to 32°C (59 to 90°F) (20°C [68°F] or more recommended), humidity: 35 to 80 % (no condensation) |
|
Power off |
Temperature: 5 to 40°C (41 to 104°F), humidity: 20 to 80 % (no condensation) | ||
Included items |
Stand, power cord, blade, blade holder, replacement blade for separating knife, cleaning kit, software RIP, manuals, etc. | ||
Modeli VersaCAMM-a, brži i precizniji od svojih prethodnika. Mogućnost printa i rezanja na jednom stroju otvara nebrojene mogućnosti tiska na razne vrste materijala.
Reklamni proizvodi, plakati, tisak velikog formata, tisak na majice, sve do sitnih naljepnica koje na jednom mjestu izrezujete po željenom obliku.
Za razliku od VP serije koristi 4 glave za tisak te omogućava brzinu tiska do 16m2 /h i preciznije konturno izrezivanje otiska.
» Prikaži specifikaciju
| Model | VP-540 | VP-300 | |
| Printing technology | Piezoelectric inkjet | ||
| Media | Width | 210 to 1,371 mm (8.3 to 54 in.) | 182 to 762 mm (7.2 to 30 in.) |
| Thickness | Maximum 1.0 mm (39 mil) with liner, for printing Maximum 0.4 mm (16 mil) with liner and 0.22 mm (9 mil) without liner, for cutting |
||
| Roll outer diameter | Maximum 180 mm (7 in.) | ||
| Roll weight | Maximum 30 kg (66 lb.) | Maximum 20 kg (44 lb.) | |
| Core diameter | 50.8 mm (2 in.) or 76.2 mm (3 in.) | ||
| Printing/cutting width (*1) | Maximum 1,346 mm (53 in.) | Maximum 736 mm (29 in.) | |
| Ink cartridges | Type | Roland ECO-SOL MAX INK | |
| Capacity | 220 cc or 440 cc | ||
| Color | Four colors (cyan, magenta, yellow, and black) | ||
| Printing resolution (dots per inch) | Maximum 1,440 dpi | ||
| Cutting speed | 10 to 300 mm/s | ||
| Blade force | 30 to 300 gf | ||
| Software resolution (when cutting) | 0.025 mm/step | ||
| Distance accuracy (when printing) (*2)(*3) | Error of less than ±0.3 % of distance traveled, or ±0.3 mm, whichever is greater | ||
| Distance accuracy (when cutting) (*3) | Error of less than ±0.4 % of distance traveled, or ±0.3 mm, whichever is greater When distance correction has been performed (when the setting for [CALIBRATION] - [CUTTING ADJ.] has been made): Error of less than ±0.2 % of distance traveled, or ±0.1 mm, whichever is greater |
||
| Repeatability (when cutting) (*3) (*4) | ±0.1 mm or less | ||
| Alignment accuracy for printing and cutting (*3) (*5) | ±0.5 mm or less | ||
| Alignment accuracy for printing and cutting when reloading media (*3) (*6) | Error of less than ±0.5 % of distance traveled, or ±3 mm, whichever is greater | ||
| Media heating system (*7) | Print heater, setting range for the preset temperature: 30 to 45 °C (86 to 112 °F) Dryer, setting range for the preset temperature: 30 to 50 °C (86 to 122 °F) |
||
| Connectivity | Ethernet (10BASE-T/100BASE-TX, automatic switching) | ||
| Power-saving function | Automatic sleep feature | ||
| Power requirements | AC 100 to 120 V ±10 %, 8.3 A, 50/60 Hz or AC 220 to 240 V ±10 %, 4.3 A, 50/60 Hz |
AC 100 to 120 V ±10 %, 5.8 A, 50/60 Hz or AC 220 to 240 V ±10 %, 3.0 A, 50/60 Hz |
|
| Power consumption | During operation | Approx. 1,110 W | Approx. 780 W |
| Sleep mode | Approx. 34 W | Approx. 33 W | |
| Acoustic noise level | During operation | 64 dB (A) or less (according to ISO 7779) | |
| During standby | 40 dB (A) or less (according to ISO 7779) | ||
| Dimensions | With stand | 2,310 (W) x 740 (D) x 1,125 (H) mm [90.9 (W) x 29.1 (D) x 44.3 (H) in.] |
1,700 (W) x 740 (D) x 1,125 (H) mm [66.9 (W) x 29.1 (D) x 44.3 (H) in.] |
| With ink-cartridge tray and stand | 2,310 (W) x 1,000 (D) x 1,125 (H) mm [90.9 (W) x 39.4 (D) x 44.3 (H) in.] |
1,700 (W) x 1,000 (D) x 1,125 (H) mm [66.9 (W) x 39.4 (D) x 44.3 (H) in.] |
|
| Weight (with stand) | 112 kg (247 lb.) | 89 kg (196 lb.) | |
| Environmental | Power on | Temperature: 15 to 32 °C (59 to 90 °F) [20 °C (68 °F) or more recommended], Humidity: 35 to 80 %RH (non-condensing) |
|
| Power off | Temperature: 5 to 40 °C (41 to 104 °F), humidity: 20 to 80 %RH (non-condensing) | ||
| Included items | Stand, power cord, ink-cartridge tray, blade, blade holder, media clamps, media flanges, replacement blade for separating knife, cleaning kit, software RIP, and user's manual, etc. | ||
VersaCAMM SP-300i/540i serije predstavlja najnovije od najpoznatijeg Rolandovog integriranog print i cut rješenja. Jednostavnost, kvaliteta i funkcionalnost koje ga odlikuju, pružaju vam profesionalnu kvalitetu ispisa.
VersaCAMM sa četiri boje donosi printer i rezač u jednom uređaju. Namijenjen je za veliki broj aplikacija koje se mogu tiskati i izrezivati po konturi sa otpornošću otiska na vanjske uvjete.
ECO-SOL MAX boje donose nekoliko ključnih poboljšanja, uključujući kraće vrijeme sušenja, veću otpornost na grebanje, bolju pokrivnost i širi spektar boja na svim materijalima. Boje su gotovo bez mirisa i ne zahtjevaju dodatne sisteme za ventilaciju prostora.
» Prikaži specifikaciju
| Model | SP-540V | SP-300V | |
| Printing/Cutting method | Piezo ink-jet method/media-moving method | ||
| Acceptable media width | 210 to 1371 mm (8-5/16 to 54 in.) | 182 to 762 mm (7-3/16 to 30 in.) | |
| Printing/Cutting width*1 | Maximum 1346 mm (53 in.) | Maximum 736mm (29 in.) | |
| Ink cartridges | Capacity |
220 cc ± 5 cc | |
Color |
Four colors (cyan, magenta, yellow and black) | ||
Printing resolution (Printing dot resolution) |
Max. 1440 dpi | ||
Acceptable tool |
Special blade for CAMM-1 series | ||
Cutting Speed |
10 to 300 mm/s | ||
Blade force |
30 to 300 gf | ||
Blade offset compensation |
0.000 to 1.500 mm (0 to 0.0591 in.) | ||
Software resolution (When cutting) |
0.025 mm/step (0.000984 in./step) | ||
Distance accuracy (When Printing)*2*3 |
Error of less than ±0.3 % of distance traveled, or ±0.3 mm, whichever is greater | ||
Distance accuracy (When cutting)*3 |
Error of less than ±0.4 % of distance traveled, or ±0.3 mm, whichever is greater When distance correction has been performed (when the setting for [CALIBRATION] - [CUTTING ADJ.] has been made): Error of less than ±0.2 % of distance traveled, or ±0.1 mm, whichever is greater |
||
Repetition accuracy (When cutting)*3*4 |
±0.1 mm or less | ||
Repetition between printing and cutting*3*5 |
±0.5 mm or less | ||
Alignment accuracy for printing and cutting when reloading media *3*6 |
Error of less than ±0.5 % of distance traveled, or±3 mm, whichever is greater | ||
Media dryer |
Heating method, Setting range for the preset temperature: 35 to 50°C (95 to 122°F) | ||
Ink -fixing device |
Print heater, Setting range for the preset temperature: 35 to 50°C (95 to 122 °F) | ||
Interface |
Ethernet (10BASE-T/100BASE-TX, automatic switching) | USB interface (compliant with Universal Serial Bus Specification Revision 1.1) | |
Ower-saving function |
Automatic sleep feature | ||
Power supply |
Voltage and frequency |
AC 100 to 120 V ± 10 % 50/60 Hz or AC 220 to 240 V ± 10 % 50/60 Hz | |
Required power capacity |
8.8 A (100 to 120 V) or 4.7 A (220 to 240 V) |
6 A (100 to 120 V) or 3 A (220 to 240 V) |
|
Power consumption |
During operation |
Approx. 1080 W (100 to 120 V) or 1230 W (220 to 240 V) |
Approx. 470 W (100 to 120 V) or 650 W (220 to 240 V) |
Sleep mode |
Approx. 30 W | Approx. 29 W | |
Acoustic noise level |
During operation |
64 dB (A) or less (according to ISO 7779) | |
During standby |
40 dB (A) or less (according to ISO 7779) | ||
Dimensions (With stand) |
2390 (W) x 800 (D) x 1291 (H) mm (94-1/8 (W) x 31-1/2 (D) x 50-7/8 (H) in.) |
1720 (W) x 770 (D) x 1275 (H) mm (67-3/4 (W) x 30-3/8 (D) x 50-1/4 (H) in.) |
|
Weight (With stand) |
149 kg (329 lb.) | 124 kg (273 lb.) | |
Environment |
Power on |
Temperature: 15 to 32°C (59 to 90°F) (20°C [68°F] or more recommended), humidity: 35 to 80 % (no condensation) |
|
Power off |
Temperature: 5 to 40°C (41 to 104°F), humidity: 20 to 80 % (no condensation) | ||
Included items |
Stand, power cord, blade, blade holder, replacement blade for separating knife, cleaning kit, software RIP, manuals, etc. | ||
